1 – An SSH tool, we prefer MobaXterm, because copying files between your Windows machine and mmpOS rig is simple. Or puTTy or similar.
2 – Your rigs internal network IP address
3 – Be on the same internal network as your rig. If you want to remotely SSH to your rig, you will have to enable port forwarding – which opens your rig to all kinds of people with malicious intent. Port forwarding is not recommended.
3 – in the rigs window, click on the rig you want to connect to
4 – scroll through the tabs on the top to the last one called “system”
5 – see your IP address – write it down or remember it.
SSH to your rig
Open MobaXterm, and perform the following:
1 – Click on “session”
2 – Click on “SSH”
3 – Enter your rigs IP address which you just found through the dashboard
4 – Click on “okay”
1 – The default username is “miner”, and the default password is “mmpOS”.
2 – Your password won’t show as you type it into the console – just type it carefully and correct and press enter.
3 – It is highly recommended that you change the password by typing passwd, type the current password (mmpOS) and input your new password twice.
When you are logged on successfully, your screen should look like the one below. Take into account that these guys are continuously improving and upgrading their product, so the options might change somewhat.
You can now perform some of the commands that showed up in the “useful commands” listing, or perform the command line tasks that you were instructed to do by the support guys.
Enjoy!
About DragonCrypto
I am definitely not an expert – I am a very passionate miner though! Mirelle Dismenol and myself strive to make mining more accessible, fun and profitable for all, even for the environment. We truly believe in the future of blockchain, and we hope our efforts contribute to the future success of blockchain and it’s technologies.
If your mining career is anything like mine, you have faced many challenges. My challenges started way before I started mining. It started with which equipment to buy, GPU or ASIC, which GPU or ASIC, which algorithm do I want to mine, where do I find all of this information, and so forth. I will publish some guides and help on these questions in separate articles 🙂
Once you start mining, on that very first day, you face the huge question of “which pool”.
You probably start with the biggest pools, because you think “they have to be good, right?”. In the days and weeks that follow, terms like poolfees, profit switching, cost to run and mining calculators start playing in your brains.
It took me a few months of pool switching and research to find useful information, primarily because you read opposing information in forums, so eventually you don’t know who to believe.
Which is why I started my own trial and error approach.
I found many pools, which don’t give you information – some don’t give you historical info, like how your rig performed, you can see when it went down, some just give you the coins you have earned, without projecting how you will perform in the future (based on past performance).
I have found pools that give you loads of technical information, but it takes 15 minutes to figure out how to configure your miner to mine at the pool. Some of these pools made me feel like I don’t know enough to mine, and mining is reserved for the l33t.
Then Mirelle Dismenol invited me onto Whalesburg profit switching pool. I have been mining there ever since.
What grabbed me about the Whalesburg interface is the following:
Easy, built in profit switching
Easy config and joining
No registration required to mine
Telegram notifications
Awesome support
Easy to read mining stats
Easy, built in profit switching
I have written a separate article on whalesburg profit switching here. But in summary, they mine the algorithm, and not the coin. You don’t have to profit hunt, they do it for you. Their back end system is very efficient, which leads to the lowest uncle rate in the industry, and more. The current coin mined is shown on the dashboard, convenient, transparent and easy to understand.
Here are some real examples – I took screenshots of some of the coin switches and activities.
Whalesburg coin switching screenshots
Easy config and joining
Whalesburg offers a click and copy config tool. This takes all of the questions out of setting up your miner. Click click, paste your wallet, type your worker name, and copy your command string.
Easy config page
Even if you rent hardware, they provide easy info:
Rented hardware config info.
No registration required to mine
Anonymous mining is supported, you do not need to register with whalesburg to mine, just point your miner and sit back!
Telegram notifications
Once you have started mining, you can subscribe to the telegram bot. Set this bot to your requirements, and always be informed.
Whalesburg has a strong support team whom provide direct support via their telegram group, usually within the half hour, depending on the time of day.
Easy to read mining stats
Well, here we have a huge differentiator. All of your stats on one page, and easy to access. Many of these stats and info exists in other pools, but whalesburg brings the best of all the info into one easy to manage place.
Your income is forecast based on your actual past and current hashrate:
Income, forecast, hashrate and current coin.
Current hashrate, Average hashrate and reported hashrate is reported, and presented in a graph, as well as total shares graph:
Total graphs on hashrate and shares.
List of workers – and detailed graphs per worker. Very handy to check on the expected performance of your rigs, especially if you have more than one:
Detailed graph per worker.
Profits graph, where you can see profits per day, and which coins contributed to your profits:
Profits graph.
Payouts information – note that the transaction fees are paid by the pool:
Payouts
Rewards – You can also export your payouts and rewards to CSV for your own analysis:
Rewards
Conclusion
Whalesburg is truly a very cool and functional pool. They do offer well structured information about your own stats, as well as pool stats, like blocks and pool strength as well.
They are continuously improving their interface, servers, and services. You can see more on their pages on medium here.
Increase your mining income and rewards!
Start mining at Whalesburg through our affiliate program with them, and mine for one month free as a tier 2 miner with no whalesburg tokens! That means you will mine at 101% profit for a month, without investing in whalesburg tokens!
Here’s how:
Click here: https://whalesburg.com/?p=AG4W and enter your wallet address to qualify for one month mining as a tier 2 miner, for free!
If you have 20 GHz or more to offer, contact us for custom benefit structures
About DragonCrypto
I am definitely not an expert – I am a very passionate miner though! Mirelle Dismenol and myself strive to make mining more accessible, fun and profitable for all, even for the environment. We truly believe in the future of blockchain, and we hope our efforts contribute to the future success of blockchain and it’s technologies.
Disclaimer! You do this at your own risk. By typing this guide we do not take any responsibility for your actions, or bricked cards.
Once you’ve started your rig, and you’ve got some AMD RX cards running, you probably want to start overclocking to get the most hashing power out of your cards.
You can try to find a modded bios on the web, there are free ones and some at a cost. Downloading a BIOS from the web is risky though – please make sure that you are 100% convinced it is the correct BIOS. Personally, we won’t do that, unless we know the person who did the mod.
Either way, you will first have to find out what BIOS you need.
For a small donation for our time, we can do the “one click” BIOS mod for you, if you’re a little uneasy. Read the disclaimer, Contact us here.
We can also have a custom BIOS mod made for you, which will give you the highest hash rate your card can achieve, as well as cut your energy consumption by about 30%. This comes at a cost to be discussed, and NOT included in the below tutorial.
What you would need
An SSH tool, I prefer MobaXterm, because copying files between your Windows machine and SMOS rig is simple. Or puTTy or similar.
SRBPolaris editor or PolarisBiosEditor
A Windows machine on the same internal network
Hard BIOS switch on some hardware
Some cards have a hard bios switch – visually inspect your card carefully to see of there is one. It will be marked. Sapphire RX580s is situated on the hdmi plug side, on the top. The overclock mode is closest to the HDMI plug, silent mode is away from the HDMI plug. You will see the difference in hashrate as you run your rig. Only flick the switch when your rig is powered down.
1 – Set all cards the to the same hard BIOS switch position.
Get BIOS details
1 – Did you read the disclaimerat the top? Go read it again.
2 – SSH into your rig. If you don’t know how, use our how to SSH into your rig guide. We use MobaXterm here, because it is very easy to use, and you can easily download and upload to and from your windows machine and your SMOS rig.
Install and use AMDMEMINFO to find BIOS details (for getting someone elses modded bios)<read disclaimer
*all commandscan be typed or copied
*if your rig crashes or freezes during these actions type “killall screen” to stop your miner from mining before you try again.
1 – Type (or copy) “wget http://54.67.59.249/amdmeminfo.tar.gz && tar xvfz amdmeminfo.tar.gz && sudo mv amdmeminfo /usr/local/bin” to download amdmeminfo.
2 – Type “sudo amdmeminfo” to see your cards and their details. These details, like memory type is quite important here if you want to look for a pre-modded bios (against our advice…. lol).
Back up BIOSes
Before you start modding your bios, you have to back up. Because good practice.
1 – So, type “sudo /root/utils/atiflash -s 0 gpu0.rom“.
2 – Do the same for GPU1 and however many you have. For example, type “sudo /root/utils/atiflash -s 1 gpu1.rom“.
3 – Type “ls -l” to verify that all your bioses are saved and backed up.
4 – Verify that your backed up bioses have a file size – 0 is not good. If this happened to you, type “killall screen” and try again.
5 – Now, transfer these backups to your Windows machine by using the “download selected files” option on the left hand side of your screen.
Mod BIOSes
1 – On your Windows box, open GPU0.rom with SRBPolaris editor.
2 – Depending on the program you are using, find the “pimp my bios” or “pimp my straps” button and click it.
That’s all you do. You don’t have to click twice, or do anything else. Just accept the messages that pop up.
3 – Save the bios file with a new name, like GPU0mod.rom.
4 – Do the same for however many bioses you have.
5 – Upload your modded bioses to your rig with SSH/MobaXterm
6 – Now, flash your bios with your modded bios.
The command is “sudo /root/utils/atiflash -p <card number> <rom file name>“
So, type “sudo /root/utils/atiflash -p 0 GPU0mod.rom“
You should get a confirmation that it was successful.
7 – Do this for each of your BIOSes
8 – Restart your miner by rebooting at the miner or console, or “sudo reboot“
Stare at your hashrate in amazement, tell us your hash improvements in the comments, and send us coinz, tell your friends.
About DragonCrypto
I am definitely not an expert – I am a very passionate miner though! Mirelle Dismenol and myself strive to make mining more accessible, fun and profitable for all, even for the environment. We truly believe in the future of blockchain, and we hope our efforts contribute to the future success of blockchain and it’s technologies.
Make up to 15% more mining with Whalesburg profit switching pool
Use our affiliate program to join and save 33% on pool fees
We, the profit hunting crypto miners
It’s been almost 10 years since the mining of crypto coins have become possible, and the world has changed a lot since then.
Whether you’ve been in the game since 2009, or only for a few months, you know this: it ain’t as easy as it used to be, and profits and gainz have dwindled.
As coin difficulties increase each day, and the value of coins fluctuate like a roller coaster ride, you have to focus on a mining strategy that aligns with your personal reasons of why you started mining in the first place. Whether it be mining for profit, or to gather some coinz, mine to trade, or to satisfy your inner nerd…
Most of us would like to make the most out of our rigs, and due to coin fluctuations, you probably have spent days switching pools, switching coins, and clicking refresh on whatomine and coinwarz. They are great sites to use to understand and get an overview, but if you have to respond to each coins momentary blip, you will be a very very busy person.
Logically, you need some smart and automated system to watch and manage profitability for you. Profit switching pools are currently the smartest solution to this profit hunting problem.
The benefit of “mine the algorithm, not the coin” becomes very clear as you do your research on increasing your immediate profits by that extra percent or two.
To that end, we have become affiliated with Whalesburg, the most profitable profit switching pool we could find.
Whalesburg profit switching pool boasts to be up to 15% more profitable*than other pools.
This is due to:
Their profit switching algorithm is automated, very well thought through, and far more intelligent than any manual decision making;
Lowest uncle rate in the industry (this alone makes them 10.8% more profitable);
Algo wide PPS+ for more consistent daily payouts – details herePPLNS (miners mine different coins, but rewards are distributed team wide, via their unique PPLNS method.); and
Server side profit switching.
Whalesburg currently mines ethash, with ethereum (ETH), ethereum classic (ETC), ubiq (UBQ) and expanse (EXP). More algorithms and more coins are currently in the pipeline.
Increase your mining income and rewards!
Start mining at Whalesburg through our affiliate program with them, and mine for one month free as a tier 2 miner with no whalesburg tokens! That means you will mine at 101% profit for a month, without investing in whalesburg tokens!
Here’s how:
Click here: https://whalesburg.com/?p=AG4W and enter your wallet address to qualify for one month mining as a tier 2 miner, for free!
If you have 20 GHz or more to offer, contact us for custom benefit structures
* we will do an article or our comparison results, watch this space
About DragonCrypto
I am definitely not an expert – I am a very passionate miner though! Mirelle Dismenol and myself strive to make mining more accessible, fun and profitable for all, even for the environment. We truly believe in the future of blockchain, and we hope our efforts contribute to the future success of blockchain and it’s technologies.